Dulux WeatherShield TEX offers designer textured finishes which can unleash your creativity and create personalized surroundings though a range of effects. WeatherShield TEX is formulated with special materials such as tough mineral crystals that give it unparallel toughness, durability, making it a perfect choice for exterior painting and also for interiors. Its high consistency and filling properties allow it to hide the imperfections of the surface.
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush followed by water jetting if required. Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compounds while painting an exterior surface. Application of one coat of ICI Pre-treatment coat is recommended for better performance of the paint.
Use Roller or Trowel or Spray. Create the desired finish using a trowel. Different finishes can be created, depending on the movement of the hand. Let it dry for 4 hours. Hard dry time is overnight.
Store container in upright position, with lid tightly closed, in a cool, dry place. Keep out of the reach of children and away from food, drink and animal feed. May be harmful if swallowed. In case if ingestion seek immediate medical attention. Ensure good ventilation at all times. Do not breathe vapour or spray. Avoid inhalation of dust by wearing a suitable nose pad during sanding and surface preparation. Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Remove slashes from the skin with soap and water or recognized skin cleanser. Do not pour leftover paint down the drains or in water courses. Contain spillage using sand or earth. Safety Data Sheet available for professional user on request. No added lead, mercury or chromium compounds. STIR THOROUGHLY BEFORE USE.