Dulux Lustre Finish |
 |
| Mid-sheen enamel paint |
Dulux Lustre Finish
High quality mid-sheen enamel paint that not only enhances beauty of home, but is also a tough paint film that protects interior surfaces for years. Recommended for interiors use, both plastered walls and wooden surfaces. If touched-up with roller while it is wet, it offers a pearl-like finish.
Dulux Lustre Finish |
|
| Mid-sheen enamel paint |
Surface Preparation :
Ensure surface is dry and free from grime, dust and grease. Remove loose or flaking particles. Abrade the surface using Emery paper no. 180 and wipe clean. For smooth surface, rough cutting should follow cutting by Emery Paper no. 320 before wipe-cleaning.
Priming :
Prime surface with ICI Wood Primer for wood or ICISB Cement Primer ( for masonry) and allow it to dry for 6 to 8 hours, till it becomes tack free. Rectify and smoothen the surface by applying good quality solvent-based putty after applying the first coat of primer. Allow putty to cut dry. Do light sanding using Emery paper no.180. Apply second coat of primer and allow it to dry for 6 to 8 hours. Do light sanding with Emery paper no. 320 and wipe clean. For best results, repeat putty and primer application, dry completely, light scuff with 320 m paper and apply one coat of ICI Gloss White Enamel paint. Allow it to Hard Dry.
Finishing :
Can be applied by brush and roller. To get typical pearl-like finish, specially designed roller application is necessary over wet paint. Stir paint thoroughly and strain through muslin cloth before use. Apply 2 coats of paint over the primed surface after thinning with ICI Dulux Thinner (61-33). Do light sanding between coats if required, after proper drying. Re-coatable between 6-12 hours under standard drying conditions ( 25? C and 50% Relative Humidity with good ventilation). However drying time may vary depending on the climatic conditions.
Thinning :
Thinner is not normally required. If necessary, thin upto 10% by volume, with ICI Dulux Thinner ( 61-33). Do not thin excessively to avoid dripping
STIR THOROUGHLY BEFORE USE
Dulux Lustre Finish |
|
| Mid-sheen enamel paint |
- Flammable Material
- Store container in upright position, with lid tightly closed, in a cool, dry place away from ignition source
- In case of fire, use foam, dry powder, CO2. Never use water.
- Keep out of reach of children and away from combustible material, food, drink and animal feed
- May be harmful if swallowed. In case of ingestion seek immediate medical attention.
- Ensure good ventilation at all times. Do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
- Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Avoid contact with skin. Repeated exposure may cause skin dryness or cracking. Remove splashes from skin with soap and water or a recognised skin cleanser.
- Do not pour leftover paint down the drain or in water courses.
- In the event of spills, contain spillage using sand or earth
- Safety Data Sheet available for professional user on request
- No added Lead, Mercury or Chromium compounds
