Metal Care Paints for metal surfaces

Dulux Satin Finish

Soft Sheen, Durable

Dulux Satin Finish

Dulux Satin Finish offers the durability of enamel and finish of emulsion. It is suitable for walls, doors,windows and furniture. It has the largest shade collection in enamels. You can match the shade on your doors and windows with the emulsion shade on your walls.

• Superior coverage compared to regular enamel
• Less drying time compared to regular enamel
• Largest Range of shades in enamel

Dulux Satin Finish

Soft Sheen, Durable

Surface Preparation :
Ensure surface is dry and free from grime, dust, grease. Remove loose or flaking properties. Sand the surface by using emery paper no. 180 and wipe clean. For pre-painted surface, where putty application is not expected use emery paper no. 320 before wipe cleaning

Priming :
Prime surface with a coat of ICI red Oxide Primer ( for metal), or ICI Wood Primer ( for wood) or ICI SB cement Primer ( for masonry) and allow to dry for 6 to 8 hours. Rectify and smoothen the surface by applying good quality solvent-based putty after applying the first coat of primer. Allow putty to cut dry. Do light sanding using emery paper no. 180. Apply second coat of primer and allow it to dry for 6 to 8 hours. Do light sanding with emery paper no.320 and wipe clean.

Finishing :
Stir paint thoroughly and strain through muslin cloth before use. Apply 2 coats of paint over the primed surface after thinning with ICI Dulux Thinner. Do light sanding in-between the coats if required, after proper drying. Re-coatable between 4 to 6 hours under standard drying conditions ( 25?C and 50% relative humidity with good ventilation). Drying time will vary depending on the climatic conditions.

Thinning :
Use upto 10% by volume of thinner for brushing and upto 25% by volume of Thinner for spray application.

STIR THOROUGHLY BEFORE USE

Dulux Satin Finish

Soft Sheen, Durable

• Flammable Material
• Store container in upright position, with lid tightly closed, in a cool, dry place away from ignition source
• In case of fire, use foam, dry powder, CO2. Never use water.
• Keep out of reach of children and away from combustible material, food, drink and animal feed
• May be harmful if swallowed. In case of ingestion seek immediate medical attention.
• Ensure good ventilation at all times. Do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
• Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• Avoid contact with skin. Repeated exposure may cause skin dryness or cracking. Remove splashes from skin with soap and water or a recognised skin cleanser.
• Do not pour leftover paint down the drain or in water courses.
• In the event of spills, contain spillage using sand or earth
• Safety Data Sheet available for professional user on request
• No added Lead, Mercury or Chromium compounds