Dulux Synthetic Clear Varnish |
 |
| Economical Clear Coating |
Dulux Synthetic Clear Varnish
This 'do it yourself' finish is quick and easy to use. Can be mixed with synthetic enamel for enhancing the gloss. Its special alkyd formula gives a natural finish that nourishes and protects interior wooden surfaces.
- Easy to use
- Compatible with synthetic enamel
- High gloss retention
Dulux Synthetic Clear Varnish |
|
Economical Clear Coating
|
Surface Preparation :
- For pre-polished wood, remove all existing coatings by sanding or scraping.
- For new wood, sand surface smooth using emery paper no 180 followed by 320/400. Wipe off loose dust particles. If required remove dust and grease using a cloth soaked in Duco thinner,
- For uneven surfaces, apply a filler coat using a putty knife or muslin cloth. Remove excess filler and allow small pits and minor cracks to dry for 1 hour. Staining is optional. Sand off with emery paper no. 180 followed by 320. Wipe off loose dust particles.
Finishing :
Stir Dulux Synthetic Clear Varnish well. Suitably thin it using Dulux Thinner for ease of application. Strain it through a nylon or muslin cloth. Apply it by brush or spray. Give 16 hours between coats for best results. Sand down between coats with 320 - grit emery paper after drying of previous coat.
Recommended application by brush or spray after mixing with Dulux Thinner.
Dulux Synthetic Clear Varnish |
|
Economical Clear Coating
|
- Flammable material
- Store container in upright position, with lid tightly closed, in a cool, dry place, away from ignition sources.
- In case of fire, use foam, dry powder, Carbon Dioxide. Never use water.
- Keep out of reach of children and away from combustible material, food, drink and animal feed
- Avoid contact with skin. Remove splashes from skin with soap and water or a recognised skin cleanser.
- Contains Cobalt Carboxylate, Ethyl Methyl Ketoxime. May produce an allergic reaction.
- May be harmful if swallowed. In case of ingestion seek immediate medical attention and show the container or label to medical personnel.
- Use only in well- ventilated areas. Vapours may cause drowsiness and dizziness. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
- Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Repeated exposure may cause skin dryness or cracking.
- Avoid release to the environment. Do not pour leftovers down the drain or in water courses.
- In the event of spills, contain spillage using sand or earth.
- Safety Data Sheet available for professional user on request
- No added Lead, Mercury or Chromium compounds
