Dulux TileShield |
 |
| Beauty Specialist for Tiles & Bricks |
Dulux TileShield
Ordinary exterior paints cannot protect sloping tile roofs and exterior brick walls from algae and fungus attack. TileShield is specially formulated to give long -lasting protection and beautiful looks.
- Tough water repellant paint film, protects from rain
- Special preservatives fight algae & fungus
- Latex - enriched formula gives long-lasting glow to tiles & bricks
- Not recommended for use over glazed tiles
Dulux TileShield |
 |
| Beauty Specialist for Tiles & Bricks |
Surface Preparation :
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing, scraping and water jetting if required. For areas severely affected by algae or fungus, application of ICI Pre-Treatment Coat is recommended. Do not apply during wet weather. Its not recommended for use over glazed tiles. Do not apply any kind of putty or primer.
Finishing :
Apply two coats of TileShield for normal, sound surfaces, with 4-6 hours between coats.
Thinning :
Dilute 1 ltr. Of TileShield with 300 ml of water.
STIR THOROUGHLY BEFORE USE
Dulux TileShield |
 |
| Beauty Specialist for Tiles & Bricks |
- Store container in upright position, with lid tightly closed, in a cool, dry place
- Keep out of reach of children and away from food, drink and animal feed
- May be harmful if swallowed. In case of ingestion seek immediate medical attention.
- Ensure good ventilation at all times.
- Do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
- Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Remove splashes from skin with soap and water or a recognised skin cleanser.
- Do not pour leftover paint down the drain or in water courses.
- In the event of spills, contain spillage using sand or earth.
- Safety Data Sheet available for professional user on request.
- No added Lead, Mercury or Chromium compounds