Dulux WeatherShield Max |
 |
| Maximum Beauty, Maximum Protection |
Dulux WeatherShield Max
Ordinary exterior emulsions cannot protect exterior walls from patches of dampness, algae, and fungus caused by rain. Dulux WeatherShield Max is especially formulated to give long lasting protection and beautiful looks
- Elastic Latex film covers hairline cracks
- Water resistant paint film protects from dampness
- Special paint preservatives fight algae and fungus
- Latex enriched formula gives a long lasting glow to your exterior walls
Dulux WeatherShield Max |
|
| Maximum Beauty, Maximum Protection |
Surface Preparation :
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. For areas severely affected by algae or fungus, application of ICI Pre-Treatment Coat is recommended. Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound while painting an exterior surface.
Priming :
Application of putty is not recommended. In case of freshly plastered walls, apply one self priming coat or one coat of ICI Exterior Acrylic Primer or WeatherShield Alkali Bloc after thinning with water in the ratio of 1:1 by volume. For best performance self priming or WeatherShield Alkali Bloc is recommended.
Finishing :
Apply two coats of WeatherShield Max for normal, sound surfaces, with 4-6 hours between coats. 3 coats may be required in case of darker colours. For parapet walls and horizontal surface, minimum 3 coats is recommended for best performance
Thinning :
Dilute 1 ltr of WeatherShield Max with 300 ml clean water.
STIR THOROUGHLY BEFORE USE
