Dulux WeatherShield Tex |
 |
| Decorates & Protects |
Dulux WeatherShield Tex
Dulux WeatherShield Tex offers designer textured finishes which can unleash your creativity and create personalized surroundings through range of effects.
- Formulated with special materials that give it unparalleled toughness, durability and water repellency
- High consistency and filling properties allow it to hide the imperfections of the surface
Dulux WeatherShield Tex |
 |
Decorates & Protects
|
Surface Preparation :
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/ stiff coir brush, followed by water jetting if required. Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound while painting an exterior surface. Application of one coat of ICI Pre-Treatment Coat is recommended for better performance of the paint.
Priming :
Apply one coat of ICI Exterior Acrylic Primer or WeatherShield Alkali Bloc or WeatherShield Tex Ultrafine after thinning with water in the ratio of 1:1 by volume. Apply it with brush or roller on the whole surface. Let it dry for 4 hours.
Thinning & Finishing :
Thinning and Finishing is dependent on design and material type being used. Please write–in for Product Data Sheet.
STIR THOROUGHLY BEFORE USE
Dulux WeatherShield Tex |
 |
| Decorates & Protects |
- Store container in upright position, with lid tightly closed, in a cool, dry place
- Keep out of reach of children and away from food, drink and animal feed
- May be harmful if swallowed. In case of ingestion seek immediate medical attention.
- Ensure good ventilation at all times.
- Do not breathe vapour or spray. Avoid inhalation of dust by wearing suitable nose pad during sanding and surface preparation.
- Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Remove splashes from skin with soap and water or a recognised skin cleanser.
- Do not pour leftover paint down the drain or in water courses.
- In the event of spills, contain spillage using sand or earth.
- Safety Data Sheet available for professional user on request.
- No added Lead, Mercury or Chromium compounds