Step 1: Preparing Surface for application
New concrete/plaster surface should be allowed to mature properly. Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax, mould, fungal growth etc. before application and all surfaces should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off.
Step 2: Application process
Prime surface with water-based cement primer or acrylic primer and allow it to dry overnight. Smoothen the surface by filling dents with thin coats of acrylic putty. Sand with emery paper and wipe clean. Dilute the paint with 25% - 40% clean water and apply the first coat. Apply two coats of Elastoglo.
Step 3: Drying time
Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating.