Dulux Aquatech Exterior Damp Protect Basecoat

Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage upto 45 sqft/L for Vertical Surfaces; 10-15 sqft/L for Horizontal Surfaces
  • Drying Time 6-8 hours
  • Coats 1
Product Features
  • Crack bridging up to 1mm
  • 3 Years Waterproofing performance
  • Good adhesion
  • Strong reinforcing polyfibre network

Product Description

Dulux Aquatech DampProtect Basecoat is an Exterior Waterproof Basecoat that can be applied on vertical as well as horizontal surfaces. Its unique AquaProtect Technology prevents the penetration of water and can handle up to 5 bar of Hydrostatic Pressure, providing waterproofing performance for up to 3 years. The basecoat is efficient in bridging the cracks of up to 1mm and provides SunReflect property that helps to reduce the surface temperature by upto 5 Degree Celsius.

Application Description

Side Wall Application:
• Clean the side walls properly as per recommendation.
• Apply 1 coat priming of WS alkali Bloc primer/ Dulux Professional WS E1000 Sealer as per
recommended dilution or a self-priming coat of Dulux Aquatech Damprotect Basecoat with 30% dilution.
• Post Drying apply 1 coat of Dulux Aquatech Damprotect Basecoat without dilution and allow for 6-8 hrs of drying.
• Post Drying apply 2 coats of Dulux Weathershield Protect or Dulux Professional WS E1000, Dulux Weathershield Max or Dulux Professional WS Elastomeric, Dulux Weathershield Powerflexx or Dulux Professional WS Flexx, with recommended dilution.
• Please ensure 6-8 hours of drying between the 2 coats. Proper film thickness is essential for the water proofing. Therefore it is important that Dulux Aquatech Damprotect Coverage shouldn’t exceed 40-45 sq.ft/Lit.
• If recommended coverage is not achieved additional coat must be applied for desired
performance.

Roof Application:
• Clean the roof and parapet surface thoroughly as explained above. Apply a self-priming coat of Dulux Aquatech Damprotect Basecoat over the dried surface by diluting with water up to 30% followed by 2-3 coats of Dulux Aquatech Damprotect Basecoat without dilution using a brush or roller.
• Achieving a proper DFT is very important for water proofing. Therefore, achieve a forced coverage of 10-15 Sqft/litre. If forced coverage is not achieved apply an additional coat of Dulux Aquatech Damprotect Basecoat.

Note: • To ensure 100% waterproofing performance, cover the full roof including parapets.

Health & Safety

Treatments such as sanding, burning off, etc. of paint films may generate hazardous dust and/or fumes. Wet sanding should be used whenever possible. Work in well ventilated areas. Keep out of reach of children. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Clean the surface thoroughly for any powdery loose particles by brushing and water jetting. Allow surface to dry completely.
  • 2. Cleaning
    Clean painting equipment immediately after use and dry
Fetching the data, please wait...