Dulux Aquatech Waterblock 2K

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 0.92 sqm/Kg
  • Drying Time 4 hours
  • Coats 2
Product Features
  • Breathable coating
  • Excellent anti-alkali property
  • Multi-surface adhesion
  • Superior anti-carbonation property

Product Description

Aquatech Waterblock 2k is a specialist 2 component product that provides protection against water penetration for interior walls, bathrooms and kitchens. Its unique Hydro breathe technology prevents swelling, blistering and chalking of paint. The breathable coating prevents the top paint layer from peeling off. The coating is suitable to be applied on the interior surface of swimming pools before applying tiling or topcoat. The product can be applied in water tanks as well.

Application Description

Step 1 : Surface Preparation For the interior surface existing POP or putty must be removed till the plaster surface is exposed. Oil or Grease must be removed with degreasing solvents; otherwise it will hamper the performance of the product. Any cracks need to be filled with appropriate Aquatech Crackfiller. Before application of the product, the surface must be pre wetted and saturated to a surface dry condition. Step 2 : Application process For Interior wall application, use a masonry brush to apply two coats of mixed slurry of Aquatech Waterblock 2K on the impacted area. Apply 1 coat vertically and allow it to dry for 4-6 hours and then apply second coat horizontally. Allow the second coat to dry for 3-4 days, after which the normal painting procedure for the wall can be followed. Step 3 : Drying time Touch Dry for the basecoat is up to an hour and allow up to 4 hours for complete drying.

Health & Safety

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding should be used whenever possible. Work in well ventilated areas. Keep out of reach of children. Refer Safety Data Sheet for more details.
  • aquatech_waterblock_2k_sds.pdf
  • dulux_aquatech_waterblock_2k_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    For the interior surfaces, existing POP or putty must be removed till the plastic surface is exposed, the surface must not be loose, it should be free from dirt, dust, chalk, loose particles.
  • 2. Cleaning
    Clean painting equipment immediately after use and dry