Key Information
-
Finish Matt
-
Coverage 0.9-1.4 sqm/Kg
-
Drying Time 4-6 Hours
-
Coats 2
Product Features
- Crack Protection
- Resistance to Efflorescence
- Resistance to Alkali Attack
Product Description
Dulux Aquatech Water Block 2K is a two component acrylic cementitious & flexible high performance waterproofing coating. It is a specialist 2 component product that provides advanced waterproofing protection in dampness prone areas in interiors. It is specially formulated with Hydrobreathe technology that helps form a protective, water resistant, elastomeric film that can resist constant exposure of water and can be applied in areas of rising dampness, swimming pools, RCC water tanks etc.
Application Description
Brush or spray gun
Tips & Advice
Preparing the Surfaces
For the Interior surfaces, existing POP or putty must be removed till the plaster surface is exposed. Ensure surface should be strong and free from dirt, dust, chalk, loose particles. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required or move the loose particles with air compressor. Oil or grease must be removed with degreasing solvents. Any cracks in the plastered surface should be filled with Aquatech Crack fillers as per the requirement and other damaged surface should be repaired with cement and sand mixture or polymer modified repair mortar. Before application of the product, the surface must be pre wetting and saturated to a surface dry condition, which improves the bonding of water block 2K to the substrate.
