Dulux Aquatech Waterblock 2K
Coverage ≈ 1.11 m²/kg
Drying Time 4-6 Hours
- Crack Protection
- Resistance to Efflorescence
- Resistance to Alkali Attack
Tips & Advice
Preparing the Surfaces
For the Interior surfaces, existing POP or putty must be removed till the plaster surface is exposed. Ensure surface should be strong and free from dirt, dust, chalk, loose particles. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required or move the loose particles with air compressor. Oil or grease must be removed with degreasing solvents. Any cracks in the plastered surface should be filled with Aquatech Crack fillers as per the requirement and other damaged surface should be repaired with cement and sand mixture or polymer modified repair mortar. Before application of the product, the surface must be pre wetting and saturated to a surface dry condition, which improves the bonding of water block 2K to the substrate.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again