Dulux Aquatech Waterproof Putty

Size
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 0.4 sqm/Kg
  • Drying Time 10 hours
  • Coats 2
Product Features
  • Efflorescence resistance
  • High water resistance
  • High adhesive strength

Product Description

Dulux Aquatech Waterproof Putty is a premium quality powder putty that is specially designed with silicone and anti-efflorescence additives to give unique waterproofing properties and efflorescence resistance for a smooth finish and extended life to the top coats.

Application Description

Step 1 : Surface Preparation

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush followed by water jetting, if required. Fill up all minor cracks and defects with suitable Dulux Aquatech Crack fillers (5mm, 10mm & 20mm) according to the crack size and depth or cement and sand mixture in the ratio 1:3. To ensure easy workability and better bonding strength with the surface, it's essential to pre-wet the surface properly.

Step 2 : Application process

Mix Aquatech Waterproof Putty with 30%-40% clean water (by weight) thoroughly to make a smooth homogenous paste. Aquatech Waterproof Putty paste from bottom of the substrate in an upward direction uniformly with the help of a steel trowel/putty blade to ensure less wastage. Allow at least 3 hours drying time for the applied paste. After drying of the first coat rub the surface very gently with the putty blade in order to remove loose particles. Apply the second coat after the first coat is fully dried or set. Preferably, leave the surface to dry overnight.

Step 3 : Drying time
Drying time for the putty is 8-10 hours, preferably overnight.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. Cleaning
    Clean all equipment with water immediately after use.
Fetching the data, please wait...