Dulux SuperClean

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage 11.2 - 13.0 sqm/L
  • Drying Time 4-6 Hours
  • Coats 2
Product Features
  • Washable & Easy Cleaning
  • Fungus Guard
  • Sheen Finish

Product Description

Dulux SuperClean is an interior water based high quality durable and smooth emulsion equipped with High Bind Technology due to which the latex particles in paint bind very closely. This results in a compact paint film that makes it harder for stains to penetrate into the wall & thus enables easy cleaning of walls. It gives soothing sheen and a rich finish to the walls. Also, it’s high washability ensures clean and easy to maintain walls which have a fresh look for years to come.

Application Description

Step 1: Prime surface with a coat of Dulux Water Based Cement Primer or Dulux Solvent based Cement Primer. Allow drying for 4-6 hrs. Smoothen the surface by filling dents with thin coats of Duwel Acrylic Putty. Allow drying for 4-6 hours. Sand with emery paper 180 and wipe clean. Apply another coat of primer & allow drying for 4-6 hrs. Primer-Putty-Primer is a must to get the desired effect of the top coat. Step 2: Use 40-45% of clean water for Br. White and Pastel shades. For Dark shades use 30% of clean water. Do not over dilute and shake the paint well before use. Sand the surface with emery paper no 180 and then wipe clean. Stir thoroughly before use. Apply 2-3 coats of Dulux SuperClean with minimum 4-6 hours between the coats. Normally two coats of paint are sufficient for opacity and the desired finish. However, an extra coat may be required for change of colour & deep base shades. Step 3: Min. 30 mins is required for the surface to dry. Allow 4-6 hours for complete drying. For Stain Removal: Allow the paint to cure for minimum of 7 days and use mild detergent solution to clean stains. Use soft cotton cloth or sponge for cleaning. Stains are best removed when fresh or within 24 hours.

Health & Safety

No added Lead, Mercury & chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Safety Data Sheet available on request
  • sc_pds_english_final.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure that the surface is clean, dry and free from all loose particles, paint film, dust, dirt, mould, fungal growth etc. before application; Surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off; For New concrete / plaster, surface should be allowed to mature properly; Use suitable Dulux AquaTech range of products to fix the dampness issue in wall; Proper surface preparation is must to get the desired effect and finish.
  • 2. Cleaning
    Clean surface from all loose poorly adhering materials by rubbing down using a suitable abrasive paper