Dulux Weathershield Powerflexx

Castle in the Air
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High Sheen
  • Coverage 4.6-6.0 sqm/L
  • Drying Time 4-6 Hours
  • Coats 2
Product Features
  • Superior Crack Proof
  • Rain Proof
  • 2X Longer Fungal Protection
  • Sun Reflect up to 5 degree Celsius

Product Description

Dulux Weathershield Powerflexx comes with revolutionary Rainproof technology - A unique combination of flexible and solid layer gives your home ultimate protection from extreme rainfall, hairline cracks, extreme heat, UV rays, dirt and dust for up to 10 years.

Application Description

Step 1 : Surface Preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots. Step 2 : Application process With Waterproofing : Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self-prime with Dulux Aquatech Flexible Basecoat (10 Years) / Waterproof Basecoat (6 Years) with 30% dilution. Apply 1 coat of Dulux Aquatech Flexible Basecoat (10 Years) / Waterproof Basecoat (6 Years) without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield PowerFlexx and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces. Normal Application : Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Apply 2-3 coats of Dulux Weathershield Powerflexx over the base coat and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall, etc. It is recommended to wash/clean the building every year for the better performance of the coating. Step 3 : Drying time Touch dry for the paint is up to 1 hour and allow 4-6 hours of drying time for recoating

Health & Safety

No added Lead, Mercury & chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Refer Safety Data Sheet for more details.
  • dulux_weathershield_powerflexx_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
  • 2. Cleaning
    Clean all epquipment with clean water immediately after use.