Dulux Weathershield Protect

Lotus Blossom
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage 4.6-5.6 sqm/L
  • Drying Time 4-6 Hours
  • Coats 2
Product Features
  • 2X Complete Protection
  • Dirt and Dust Resistance
  • Anti Color Fading
  • Algal and Fungal Resistance

Product Description

Dulux Weathershield Protect is a high performance premium exterior paint that protects your home from the damaging effects of all forms of weather, specially rain. It’s powered by ‘Fungal Proof’ technology’ that resists the formation of ugly black spots and fungal patches. It gives a performance of 6 years and comes with special SunReflect pigments that reduce surface temperature up to 5 degrees to keep your homes cooler.

Application Description

Step 1 : Surface Preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots. Step 2 : Application process With Waterproofing : Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self prime with Dulux Aquatech DampProtect Basecoat with 30% dilution. Apply 1 coat of DampProtect basecoat without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces. Normal Application : Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces. Step 3 : Drying time Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating

Health & Safety

Store in a cool, dry and well-ventilated place, away from sources of heat, ignition and direct sunlight. Keep the container tightly closed. Keep out of the reach of children and away from food, drinks and animal feed. If swallowed, seek· medical advice immediately and show this container or label. Avoid contact with Skin or Eyes. Refer Safety Data Sheet for more details.
  • dulux_weathershield_protect_pds.pdf
  • dulux_weathershield_protect_base_sds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
  • 2. Cleaning
    Clean all epquipment with clean water immediately after use.