Dulux Weathershield Protect
SunReflect Technology
ONLY AVAILABLE IN STORE
Key Information
-
Finish Soft Sheen
-
Coverage 50-55 Sq.Ft/Ltr
-
Drying Time 4-6 Hours
-
Coats 2
Product Features
- SunReflect Technology
- Long lasting protection
- WeatherProof
- Guarantee 5 years
- Anti algal & anti fungal
Product Description
Dulux Weathershield Protect is a high performance premium exterior paint that protects your home from the damaging effects of all forms of weather, specially rain.It’s powered by ‘Fungal Proof’ technology’ that resists the formation of ugly black spots and fungal patches. It also comes with special SunReflect pigments that reduce surface temperature up to 5 degrees to keep your homes cooler.
Application Description
Use Roller or Brush. Stir thoroughly before use. Apply 2-3 coats of Dulux Weathershield Sunreflect with 4-6 hours between coats. An additional coat should be applied incase of horizontal surfaces like top of windows, ledges, parapet wall, etc
Health & safety
Hazard warnings
Keep out of reach of children and away from food, drink and animal feed. Avoid contact with skin. Wear suitable gloves. Contains DITHIO-2, 2 BIS (BENZMETHYLAMIDE). May produce an allergic reaction. Avoid release to the environment. Refer to special instruction/safety Data Sheets. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Contain spillage using sand or earth. Store container in an upright position, with lid tightly closed, in a cool, dry place. Safety Data Sheet available for professional user on request. No added Lead, Mercury or Chromium compounds. STIR THOROUGHLY BEFORE USE
Tips & Advice
Preparing the Surfaces
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungus, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Avoid inhalation of dust during cleaning of the surface For areas severely affected by algae or fungus, application of ICI Pre-Treatment Coat is recommended. Fill up all minor cracks and defects with cement and sand mixture in the ratio 1:3. Avoid application of putty or filling compound. Freshly plastered surfaces must be allowed to cure completely.
