Dulux Weathershield Tile

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage 4.6-6.5 sqm/L
  • Drying Time 4-6 Hours
  • Coats 2
Product Features
  • Water Beading Effect
  • Microbond Latex Film
  • Fungal Guard
  • Colour Lock Technology

Product Description

Ordinary exterior paints cannot protect the sloping tile Roofs and exterior brick walls from algae and fungus attacks. Dulux Weathershield Tile has a strong latex film which gives exterior tiles, bricks and stones a rich sheen and protection from algae, fungus, cracking and peeling on hard surfaces.

Application Description

Step 1 : Preparing Surface for application Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Step 2 : Application process Dilute 1 liter of the paint with 300-400 ml of clean water for solid shades. In case of deep colours, dilute with maximum of 250 ml of water to 1liter paint. No Dilution is recommended for Clear and Metallic shades. Stir thoroughly before use. Apply 2-3 coats with an intermittent drying time of 4-6 hours Step 3 : Drying time Touch dry for the paint is up to 1 hour and allow 4-6 hours of drying time for recoating

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Wear suitable gloves. Keep out of the reach of children. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. May cause sensitisation by skin contact. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. If swallowed seek medical advice immediately and show this container or label. Avoid contact with skin or eyes. Do not empty into water course hazardous or special waste coll, Do not breathe gas/fumes/vapours/spray. Use only in well ventilated areas. Remove as much paint as possible from brushes/rollers before cleaning. Do not empty into drains, dispose of this material and its container at hazardous or special waste collection points
  • dulux_weathershield_tile_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
  • 2. Cleaning
    Clean all epquipment with clean water immediately after use.