Dulux Weathershield Tile

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage 4.6-6.5 sqm/L
  • Drying Time 4-6 Hours
  • Coats 2
Product Features
  • Water Beading Effect
  • Microbond Latex Film
  • Fungal Guard
  • Colour Lock Technology

Product Description

Ordinary exterior paints cannot protect the sloping tile Roofs and exterior brick walls from algae and fungus attacks. Dulux Weathershield Tile has a strong latex film which gives exterior tiles, bricks and stones a rich sheen and protection from algae, fungus, cracking and peeling on hard surfaces.

Application Description

Step 1 : Surface Preparation Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots. Step 2 : Application process Dilute 1 liter of the paint with 300-400 ml of clean water for solid shades. In case of deep colours, dilute with maximum of 250 ml of water to 1liter paint. No Dilution is recommended for Clear and Metallic shades. Stir thoroughly before use. Apply 2-3 coats with an intermittent drying time of 4-6 hours Step 3 : Drying time Touch dry for the paint is up to 1 hour and allow 4-6 hours of drying time for recoating

Health & Safety

Treatments such as sanding, burning off etc of paint films may generate hazardous dust and/or fumes. Wet sanding/flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Refer Safety Data Sheet for more details.
  • dulux_weathershield_tile_sds.pdf
  • dulux_weathershield_tile_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
  • 2. Cleaning
    Clean all epquipment with clean water immediately after use.