Sadolin Interior NC Sanding Sealer
Coverage 80-90 sqft/lt/coat
Drying Time 1-2 Hours
Sadolin NC Sanding Sealer is a nitrocellulose based, quick drying, high fill, clear wood undercoat. Specially designed to offer excellent sealing properties, it is easy to sand and provides a great base for clear coat application. For best performance recoat with Sadolin NC Topcoats.
Brush or Rag or Spray
Health & safety
No added Lead, Mercury & Chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and other fumes. Wet sanding/flaming should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Do not breathe gas/fumes/vapour/spray. Use only in well ventilated areas. Remove as much paint as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. Do not use empty container for storing food. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Safety data sheet available for professional/user on request. Do not empty into drains or water course. Do not eat, drink or smoke when using this product. Keep away from combustible material. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher - Never use water jet. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower and soap or a proprietary skin cleanser. Do not use solvents or thinners. Lift with care – gross weight may exceed 10 kg or more.
- Easy to apply & sand
- Excellent Grain Filling
Preparing the Surfaces
1. Clean the surface using sand paper no.180 and keep free of dust and grime. 2. Prepare the surface appropriately by filling all surface defects with Sadolin Wood Filler. Ensure complete drying of the filler. Sand the surface with sand paper no.320/400 and wipe to get a smooth uniform surface. 3. Stains application: Apply Sadolin Wood Stains if required and allow to dry for 1 hr. Do not sand the stained coat.
Remove as much paint as possible from brushes and rollers before cleaning.
Store in a cool and shaded place.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again