Sadolin PU Hardener Gloss

Key Information
-
Finish N/A
-
Coverage NA
-
Drying Time NA
-
Coats 1
Product Description
SADOLIN PU HARDENER GLOSS is one of the 2 components to be used with PU interior & exterior gloss topcoats using the recommended mixing ratio.
Application Description
Spray
Health & safety
Lead content in dried paint film does not exceed 90 parts per million. Use Wet sanding/flatting to avoid generation of hazardous dust and/or fumes. Refer to Safety Data Sheets for more information
- Easy to use
-
Preparing the Surfaces
1. Clean the surface using sand paper no.180 and keep free of dust and grime. 2. Prepare the surface appropriately by filling all surface defects with Sadolin Wood Filler. Ensure complete drying of the filler. Sand the surface with sand paper no.320/400 and wipe to get a smooth uniform surface. 3. Stains application: Apply Sadolin Wood Stains if required and allow to dry for 1 hr. Do not sand the stained coat.
-
Cleaning
Remove as much paint as possible from brushes and rollers before cleaning.
-
Storing
Store in a cool and shaded place.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Calculate again