Dulux Quick Drying Primer

Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 10.21 - 11.14 sqm/L
  • Drying Time 3 hours
  • Coats 1
Product Features
  • Water-based Primer for Wood & Metal
  • Superior Corrosion Resistance
  • Quick drying

Product Description

Dulux Quick Drying Primer is a premium quality water-based primer for application on wood and metal surfaces. It is ec0-friendly water-based undercoat with low odour and low voc. Unlike conventional solvent based primers it dries quickly and therefore the topcoat ca n be applied on the same day.

Application Description

Step 1 : Surface Preparation

For best results, use Dulux Quick Drying primer for both wood and metal. On wood surfaces, primer-putty-primer process is recommended for a smooth surface. On metal surfaces, 2 coats of primer are recommended.

Step 2 : Application process

For Wood: Sand the surface clean with Emery paper 180 and wipe all loose particles. If the cleaned surface is smooth, directly apply 2 coats of Dulux Stay Bright Glass. If the surface is rough or uneven, apply a coat of Dulux Quick Drying primer, then use putty to smoothen the surface, and apply another coat before applying topcoat.
For Metal : Sand the surface clean with Emery paper 180 and wipe all loose particles, if cleaned surface is smooth directly apply 2 coats of Dulux Stay Bright Glass. If the cleaned surface is rough, apply 2 coats of Dulux Drying Primer before usage.

Step 3 : Drying time
For single coat at standard thickness under normal condition, touch dry is within 15 mins and recoating time is 2-3 hours.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. Cleaning
    Clean all equipment with water immediately after use.
Fetching the data, please wait...