Dulux Aquatech Repair Pro Latex

Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish N/A
  • Coverage Not Applicable
  • Drying Time Brush apply 2 coats on the concrete in a span of 4-6 hours
  • Coats 1
Product Features
  • High water resistance

Product Description

Dulux Aquatech Repair Pro Latex is a superior performing modified SBR (Styrene Butadiene Rubber) based repair polymer. It is used for the repair of old concrete, columns, beams, chajjas, waterproofing of toilets, balconies and sinking areas. It reduces shrinkage of concrete & thereby does not let crack form in the concrete even after multiple years. It contains plasticizers that improves the workability of the cement mix at low water ratios, providing better cohesion & bonding.

Application Description

For Repair mortar
• For repair mortar, please follow the below ratio of mixing
• 50 kg cement: 150 kg washed sand: 6-7.5 kg of additive: 10 lit water.

As a waterproofing coat
• Mix the additive with the cement in the ratio 1: 2 by weight.
• Mix for 2-3 mins to avoid air entrapment, add cement to the additive till a good consistency is achieved.
• Brush apply 2 coats on the concrete in a span of 4-6 hours. This can be used in areas like below the tiling areas in bathroom or sunken areas, small balconies, chajjas and parapet walls.
• Overlay with protective screed for the desired slope and thickness.

As a Bond Coat
• Mix Repair Pro Latex with Cement in the ratio of 1:1 by weight.
• Add cement into the additive and then stir slowly till homogeneity is achieved.
• Apply 1 coat to the prepared concrete substrate.
• Overlay with repair mortar when the bond coat is still wet/tacky.

As a Concrete repair
• Use the below mentioned ratio for preparing repair mortars for concrete beams, columns, chajjas, parapet walls
• Portland cement: 50 kg, Washed sand: 75 kg,6mm Aggregates: 75 kg, Additive- 6-7.5 kg, Water 10 lit

Curing and Maturation
• The standard maturation practices for concrete columns, beams, chajjas and parapet walls needs to be maintained even while using the additive.
• For waterproofing of low areas like below the bathroom tiles, or sunken areas, it is essential to provide 1-2 days of setting time for a proper solution.

Health & Safety

Health Safety and Environmental Information: No added Lead, Mercury & chromium compounds. • Lead content in dried paint film does not exceed 90 parts per million. • Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and other fumes. • Wet sanding/flaming should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. • Do not breathe vapour/spray. • Remove as much paint as possible from brushes and rollers before cleaning. • Do not use empty container for storing food. • Lift with care - gross weight may exceed 10 kg Hazard Statements: No known significant effects or critical hazards. Precautionary Statements: • Keep out of reach of children. • If medical advice needed, have product container or label at hand. • Do not get in eyes, skin or on clothing. • Call a POISON CENTER or physician/Doctor if you feel unwell. • Dispose of contents and containers in accordance with all local, regional, national and international regulations

Tips & Advice

  • 1. Cleaning
    Clean painting equipment immediately after use and dry
  • 2. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Fetching the data, please wait...