Good to see you!
Otherwise login by email.
Welcome to Dulux
Otherwise login by email.
Terms and Conditions
Thanks!
Our latest tips and inspirations are on their way to your mailbox
Registration complete
Forgotten your password?
Please enter email address associated to your account
Password changed successfully
We successfully updated your personal details.
Forgotten your password?
For more tailored inspiration, please fill in the 3 questions below.
You need to answer all of the questions before submitting.
Thanks for registering
We will send you colourful news every now and then

Dulux Simply Refresh Wall Filler
Your Measurements:
Amount Needed:
For the best result we recommend to use
{coatAmount} for {productTitle}
-
Finish N/A
-
Coverage 60 rft/kg
-
Drying Time 6 hours
-
Coats 1
-
Easy to sand
-
Suitable for waterproofing of sunken areas
-
Excellent Adhesion
-
Shrink Free
-
Superior Hardness
-
Unibond Technology
-
Interior/Exterior Surface repair
Product Description
Dulux Simply Refresh Wall Filler is a ready-mix, high performance crack filler which is suitable for application on a wide variety of substrates like concrete plaster both interiors/exteriors and wooden-plaster joints. The wall filler is made of inert grade, light weight minerals that make them shrink free, tough & easy to use.
Application Description
Step 1 : Preparing Surface for Application
• Ensure that the surface to be applied is clean & dry. Any fungal growth should be removed thoroughly.
Step 2 : Application Process
• Create a V shaped groove on the surface to be filled.
• Ensure that the surface to be applied is clean & dry.
• Fill the area using Dulux Aquatech Wall filler & leave it to dry. After 30 mins Sponge the surface with a moist cloth to remove any excess material.
Step 3 : Finishing
• Wait for 5-6 hours for the material to dry completely & then proceed to paint
• Ensure that the surface to be applied is clean & dry. Any fungal growth should be removed thoroughly.
Step 2 : Application Process
• Create a V shaped groove on the surface to be filled.
• Ensure that the surface to be applied is clean & dry.
• Fill the area using Dulux Aquatech Wall filler & leave it to dry. After 30 mins Sponge the surface with a moist cloth to remove any excess material.
Step 3 : Finishing
• Wait for 5-6 hours for the material to dry completely & then proceed to paint
Health & Safety
• No added Lead, Mercury & chromium compounds.
• Lead content in dried paint film does not exceed 90 parts per million.
• Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and
other fumes. Wet sanding/flaming should be used wherever possible.
• Work in well ventilated areas. Use suitable personal protection equipment.
• Wear eye/hand protection.
• Do not breathe vapour/spray.
• Remove as much paint as possible from brushes and rollers before cleaning.
• Do not get in eyes, on skin or on clothing.
• Do not empty into drains or water course.
• Call a POISON CENTER or physician if you feel unwell.
• Keep away from food drinks and animal feed.
- msds_wall_filler.pdf
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).


Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
More than one wall to paint? Try our advanced paint calculator