Dulux Acrylic Putty

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 1.85 sqm/Kg
  • Drying Time 4 hours
  • Coats 1
Product Features
  • Easy to spread
  • Superior Whiteness
  • Excellent filling property

Product Description

Dulux Acrylic Wall putty is formulated for filling cracks, joints, leveling uneven and rough masonry and plasterwork up to 3-4mm. It is also used for filling defective cement surfaces to give a smooth and excellent finish.

Application Description

Step 1 : Surface Preparation New concrete/plaster surface should be allowed to mature properly. Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, greases, wax etc. before application. Prime surface with a coat of Dulux Solvent Bases Cement primer or Dulux Water Based Cement Primer and dry overnight. Step 2 : Application process Smoothen the surface by using Dulux Acrylic Wall Putty to fill cracks and dents. Allow drying for 4-6 hours. Sand the surface with Emery paper no. 180. Wipe off loose particles. Apply another coat of primer and allow drying for 4-6 hours. Sand the surface Emery Paper no. 380 and wipe clean. Primer-Putty-Primer is a must to get the desired effect of the topcoat Step 3 : Drying time At standard thickness under normal condition, touch dry is within 30 mins and recoating time is 4 hours.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
  • dulux_acrylic_putty_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. Cleaning
    Clean all equipment with water immediately after use.