Dulux Aquatech Damp Protect 2in1

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Find a Store
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage upto 45 sqft/L for Vertical Surfaces; 9-11 sqft/L for Horizontal Surfaces
  • Drying Time 6-8 hours
  • Coats 1
Product Features
  • 8 years Waterproofing Performance
  • Crack bridging up to 1mm
  • Surface Temperature reduction of upto 10 deg C (On Roof)
  • Multi-surface Adhesion

Product Description

Dulux Aquatech Exterior Damp Protect 2 in 1 is a high quality premium waterproofing coating that provides good water resistance when applied on both Exterior vertical walls & Roof surfaces. It's revolutionary Damp Resist Technology bridges cracks and covers the porous wall or Roof surface with a thick film that creates a durable and protective layer. This helps in preventing water seepage thus providing better waterproofing on the applied surfaces.

Application Description

Side Wall Application:
• Clean the side walls properly as per recommendation.
• Fill the cracks using Aquatech Crack Filler
• Apply 1 self-priming coat of Dulux Aquatech Damprotect 2in1 with 30% dilution.
• Post Drying apply 1 coat of Dulux Aquatech Damprotect 2in1 without dilution and allow for 6-8 hrs of drying.
• Post Drying apply 2 coats of Dulux Weathershield Protect Rainproof or Dulux Weathershield Protect Dustproof with recommended dilution.
• Please ensure 6-8 hours of drying between the 2 coats. Proper film thickness is essential for the water proofing. Therefore it is important that Dulux Aquatech Damprotect 2in1 Coverage shouldn’t exceed 35-45 sq.ft/Lit.
• If recommended coverage is not achieved additional coat must be applied for desired performance.

Roof Application:
• Clean the roof and parapet surface thoroughly as per recommendation.
• Fill the cracks using Aquatech Crack Filler.
• Apply a self-priming coat of Dulux Aquatech Damprotect 2in1 over the dried surface by diluting with water

Health & Safety

Treatments such as sanding, burning off, etc. of paint films may generate hazardous dust and/or fumes. Wet sanding should be used whenever possible. Work in well ventilated areas. Keep out of reach of children. Refer Safety Data Sheet for more details.
Download Adobe Reader

Tips & Advice

  • 1. Preparing the Surfaces
    • Clean the surface thoroughly for any powdery loose particles by brushing and water jetting. Allow surface to dry completely.
    • Freshly plastered surfaces must be allowed to cure completely (12 weeks for new masonry surfaces).
  • 2. Cleaning
    Clean painting equipment immediately after use and dry

How much paint do I need?

Measure your dimensions

Do you know the area?

Enter your measurements

Paintable area

{{!-- The value will be injected with JavaScript --}}
{{!-- The value will be injected with JavaScript --}}
m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

{{!-- This value will be injected with JavaScript --}}

Amount needed:

{{!-- This value will be injected with JavaScript --}}

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator

Add a new job

  • Living room
  • Bedroom
  • Kitchen

Add a new job

  • Living room
  • Bedroom
  • Kitchen

Edit a job

Delete job

Delete job

Are you sure? All notes, photos and saved items will be deleted.

Save colour

Save to My Workspace

Add to job

Dulux Aquatech Damp Protect 2in1

Save job

Sorry, we couldn't find any results
Fetching the data, please wait...