Dulux Lustre

Leather Brogue
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Mid Sheen
  • Coverage 4.6-5.5 sqm/L
  • Drying Time 6 hours
  • Coats 2
Product Features
  • High opacity
  • Multisurface Paint
  • Washable
  • Best dana finish

Product Description

Dulux Lustre Dana Finish Enamel is special enamel paint with unique Grain Technology to provide a unique Dana Finish and Superior Tensile Strength to provide hard ¬films. It also offers pearl like fi¬nish, when touched up with rollers while it is wet. It is recommended for interior use & can be used on plastered walls & wooden surfaces

Application Description

Step 1 : Surface Preparation
Prime the surface with Duwel Wood Primer for wood or Dulux SB cement primer for masonry surface. Smoothen the surface by applying good quality putty and sand it after drying. Apply second coat of putty if required. Smoothen the surface by sanding with emery paper no. 320 & wipe clean. Apply second coat of Primer with brush and roller
Step 2 : Application process
Stir the paint well & strain through the muslin cloth before use. Apply the fi¬rst coats of Dulux Lustre Dana Finish Enamel without thinning for better performance. If required dilute the material with 10% of Duwel Thinner (61-33) or Mineral Turpentine Oil. Apply second coat without thinning after the complete drying of the ¬first coat (6 – 12 hrs).
Step 3 : Drying time
Touch dry is up to 1 hour and tack free dry is within 4-6 hours.

Health & Safety

Treatments such as sanding, burning off etc. of films may generate hazardous dust and/or fumes sanding/ flatting should be used wherever possible. Work in well ventilated areas. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure Surface is dry & free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe
    clean. For prepainted surface, where putty application is not expected use
    Emery paper No. 320 & wipe clean.
  • 2. Cleaning
    Clean all equipment with Duwel Thinner (61-33) or White Spirit / Mineral Turpentine Oil immediately after use.
Fetching the data, please wait...