Dulux Red-oxide Metal Primer

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 8.8 - 9.2 sqm/L
  • Drying Time 2.5 hours
  • Coats 1
Product Features
  • Stronger Adhesion
  • Effective Corrosion Protection

Product Description


This is a solvent based economical primer anti-corrosive protective primer for interior and exterior ferrous and non-ferrous metal work, including steel work, new, weathered and pre-treated zinc and galvanized iron. It may also be applied over pre-treated aluminium.

Application Description

Step 1 : Surface Preparation

Surface must be clean, dry and free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials rubbing down using a suitable abrasive paper.

Step 2 : Application process

For best result, up to 1-part Dulux Thinner (61-33) or equivalent to 10 parts of paint by volume for brush application.

Step 3 : Drying time
For single coat at standard thickness under normal condition, touch dry is within 30 mins and tack free dry is within 2.5 hours.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner or white spirit / mineral turpentine immediately after use.
Fetching the data, please wait...