Duwel Pink Wood Primer

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 8.8 - 9.2 sqm/L
  • Drying Time 4 hours
  • Coats 1
Product Features
  • Superior Adhesion
  • Superior Wood Penetration
  • Better Top Coat Coverage

Product Description

These are solvent-based protective primer for interior wood surfaces that covers the wood grains and provide uniform surface for subsequent paints. It enhances coverage of finish paint besides improving enamel hold out properties.

Application Description

Step 1 : Surface Preparation Ensure surface is free from grime, dust and grease. Remove loose or flaking particles. Sand the surface by using Emery Paper [No.180] and wipe clean. Step 2 : Application process Once the wooden surface is dry and smooth. prime with a coat of ICI Wood primer. Available in “Ready For Use" form for brushing. Add up to 10% by Volume of lCl Dulux Thinner (61-33) to primer for conventional spray application. Allow it to dry for 4to 6 hours after application. Fill up minor cracks and defects with KP filler or an equivalent good quality solvent-based putty after applying first coat of primer. Allow putty to cut dry. Then apply second coat of primer on the puttied surface and allow to dry for 4 to 6 hours. Before application of topcoat, do light sanding with Emery paper{No.320) and wipe clean. Step 3 : Drying time ICI wood primer is normally surface dry in 30 min & recoatable after 4 hrs. under standard drying conditions (25 deg C & 50% Relative Humidity with good ventilation). Drying time will vary depending on the Climatic conditions.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.
  • duwel_wood_primer_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner or white spirit / mineral turpentine immediately after use.