Super Tough Paint with Soft Sheen Finish
Dulux Super Satin is a premium soft-sheen enamel paint that gives a luxurious satin-like finish and has a large range of rich and clean shades. With its superior coverage and lower drying time than standard enamels, it is a recommended choice for wood and metal surfaces. It is embedded with fungus-fighter technology, that makes it suitable even in wet and damp climates.
Roller, brush or spray
Dry sanding, flame cutting or welding of the dry paint film will give rise to dust or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. The material is flammable. Store container in upright position with lid tightly closed in a cool, dry place, away from ignition sources. Keep out of reach of children and away from combustible material, food, drink and animal feed. Do not breathe gas/ fumes/ vapour/ spray. Do not pour left-over paint down drains or in watercourses. Avoid contact with skin or eyes. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleanser. Do not use solvent thinners or white spirits. Repeated exposure may cause skin dryness or cracking. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of fire, use foam, dry powder, AAAF or CO2. Never use water. Avoid release to the environment. Contain spillage using sand or earth. Refer to special instructions/ safety data sheet. Use only in well-ventilated areas. Vapours may cause drowsiness and dizziness. Contains cobalt, carboxylate, ethyl, methyl and ketoxime. May produce an allergic reaction. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Safety data sheet available for professional users on request. No added Lead, Mercury or Chromium compounds.
Ensure surface is dry and free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 and wipe it clean. For pre-painted surfaces where putty application is not expected, use Emery paper No. 320 and wipe clean.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again