Dulux Satin Stay Bright
Rich and Bright Colours for Wood and Metal
Dulux Satin Stay Bright is water-based premium enamel which gives a soft sheen finish. Formulated with fadeproof and anti-yellowing features, it is rich in other benefits as well. A high coverage and water-thinnability make it a cost-effective option, and with fungus resistance, low odour and low volatile chemicals it is the healthiest enamel for homes. It also dries far quicker than traditional oil-based enamels.
Roller, brush or spray
Dry sanding, flame cutting or welding of the dry paint film will give rise to dust or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. The material is flammable. Store container in upright position with lid tightly closed in a cool, dry place, away from ignition sources. Keep out of reach of children and away from combustible material, food, drink and animal feed. Do not breathe gas/ fumes/ vapour/ spray. Do not pour left-over paint down drains or in watercourses. Avoid contact with skin or eyes. In case of contact with skin, wash immediately with soap and water or a proprietary skin cleanser. Do not use solvent thinners or white spirits. Repeated exposure may cause skin dryness or cracking. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of fire, use foam, dry powder, AAAF or CO2. Never use water. Avoid release to the environment. Contain spillage using sand or earth. Refer to special instructions/ safety data sheet. Use only in well-ventilated areas. Vapours may cause drowsiness and dizziness. Contains cobalt, carboxylate, ethyl, methyl and ketoxime. May produce an allergic reaction. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Safety data sheet available for professional users on request. No added Lead, Mercury or Chromium compounds.
Ensure surface is dry and free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 and wipe it clean. For pre-painted surfaces where putty application is not expected, use Emery paper No. 320 and wipe clean.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again