Dulux Stay Bright Gloss

Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish High Sheen
  • Coverage 9.2-11.1 sqm/L
  • Drying Time 4 hours
  • Coats 2
Product Features
  • Water based Gloss
  • Fadeproof Technology
  • Quick drying
  • Low VOC

Product Description

Dulux Stay Bright Gloss is water based premium quality enamel. It gives a smooth ¬finish with a glow of gloss. Unlike ordinary enamel paints, Dulux Stay Bright Gloss comes in rich and bright colors with quick drying and anti-yellowing properties. It is also fade proof, so the surface retains the freshly painted look for a longer time. Dulux Stay Bright Gloss complements wooden and metallic surfaces, just as it adorns walls

Application Description

Step 1 : Preparing Surface for application Sand the surface with Emery paper 180, Wipe and clean. Flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. Step 2 : Application process Dilute the paint as per recommended ratio. In case of wood and masonry surface, apply the first coat by brush, followed by leveling with a sponge roller. Allow to dry for at least 4-6 hrs. After complete drying of the first coat, apply the second coat and dry overnight. Follow the same dilution ratio for second coat. Step 3 : Drying time Touch dry for the paint is up to 40mins.

Health & Safety

Treatments such as sanding, burning off etc. of films may generate hazardous dust and/or fumes sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Keep away from sources of ignition – no smoking. Do not breathe gas / fumes / vapour / spray.
  • dulux_stay_bright_gloss_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure Surface is dry & free from grime, dust, and grease. Remove loose or flaking particles. Sand the surface by using Emery paper No. 180 & wipe clean. For prepainted surface, where putty application is not expected use Emery paper No. 320 & wipe clean.
  • 2. Cleaning
    Clean all equipment with water immediately after use.