Choose a product
Paint Colours - House Colour, Home Paint, House Painting
Choose a product
Dulux Weathershield Powerflexx

Dulux Weathershield Powerflexx

COTSWALD STONE

Change Colour

Size

1 l

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish High Sheen
Coverage 4.6-6.0 sqm/L
Drying Time 4-6 Hours
Coats 2

Product Features

Superior Crack Proof
Triple Defence Technology
PU Modified Acrylic
Superior Weather Resistant

Product Description

Dulux Weathershield Powerflexx is a high-performance ultra-premium exterior emulsion powered by Triple Defense Technology which provides superior protections against Cracks and Extreme Weather Conditions like heat, dust, and rain which damages the beauty of your house. With the backbone of PU-MA (Polyurethane Modified Acrylic) & Silicon additives the paint film keeps your house protected and beautiful for upto 12 Years.

Application Description

Step 1 : Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots.
Step 2 : Application process
With Waterproofing :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self-prime with Dulux Aquatech Flexible Basecoat (10 Years) / Waterproof Basecoat (6 Years) with 30% dilution. Apply 1 coat of Dulux Aquatech Flexible Basecoat (10 Years) / Waterproof Basecoat (6 Years) without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield PowerFlexx and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Normal Application :

Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc
Apply 2-3 coats of Dulux Weathershield Powerflexx over the base coat and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces like the top of windows, ledges, parapet wall, etc. It is recommended to wash/clean the building every year for the better performance of the coating.

Step 3 : Drying time Touch dry for the paint is up to 1 hour and allow 4-6 hours of drying time for recoating

Health & Safety

No added Lead, Mercury & chromium compounds. Lead content in dried paint ﬁlm does not exceed 90 parts per million. Refer Safety Data Sheet for more details.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
2. Cleaning

Clean all epquipment with clean water immediately after use.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator