Dulux Weathershield Protect Rainproof

Select a Colour

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish Soft Sheen
Coverage 4.6-6.0 sqm/L
Drying Time 4-6 Hours
Coats 1

Product Features

Silicone technology
High durability
Soft Sheen finish
Advanced Rainshield Technology

Product Description

Dulux Weathershield Protect Rainproof is a premium exterior emulsion specially designed for protection against the extreme weather elements like rainfall, dust and sunlight. It has been enriched with super durable binders that provide extreme protection against efflorescene & algal attacks in the high humid & rainfall regions when compared normal exterior paints.

Application Description

Step 1 : Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots.
Step 2 : Application process
With Waterproofing :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self prime with Dulux Aquatech DampProtect Basecoat with 30% dilution. Apply 1 coat of DampProtect basecoat without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Normal Application :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Step 3 : Drying time
Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating

Health & Safety

No added Lead, Mercury & chromium compounds. Lead content in dried paint ﬁlm does not exceed 90 parts per million. Refer Safety Data Sheet for more details.

Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
2. Cleaning

Clean all epquipment with clean water immediately after use.

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator