Dulux Weathershield Protect Rainproof

Gentle Green
Paint Calculator
This product is currently out of stock, please visit a store or other online retailers.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Soft Sheen
  • Coverage 4.6-6.0 sqm/L
  • Drying Time 4-6 Hours
  • Coats 1
Product Features
  • Silicone technology
  • High durability
  • Soft Sheen finish
  • Advanced Rainshield Technology

Product Description

Dulux Weathershield Protect Rainproof is a premium exterior emulsion specially designed for protection against the extreme weather elements like rainfall, dust and sunlight. It has been enriched with super durable binders that provide extreme protection against efflorescene & algal attacks in the high humid & rainfall regions when compared normal exterior paints.

Application Description

Step 1 : Surface Preparation
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Use Dulux Aquatech Pre Treatment Coat to ensure that algae and fungi are removed from the roots.
Step 2 : Application process
With Waterproofing :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume or self prime with Dulux Aquatech DampProtect Basecoat with 30% dilution. Apply 1 coat of DampProtect basecoat without dilution as a waterproofing coat. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Normal Application :
Application of putty is not recommended. Apply one self- priming coat or one coat of Dulux Exterior Acrylic Primer or Dulux Weathershield Alkali Bloc Primer after thinning with water in the ratio of 1:1 by volume. Apply 2-3 coats of Dulux Weathershield Protect and allow a drying time of 4-6 hours between the coats. An additional coat should be applied in case of horizontal surfaces.
Step 3 : Drying time
Touch dry for the paint is up to 30 minutes and allow 4-6 hours of drying time for recoating

Health & Safety

No added Lead, Mercury & chromium compounds. Lead content in dried paint film does not exceed 90 parts per million. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint.
  • 2. Cleaning
    Clean all epquipment with clean water immediately after use.
Fetching the data, please wait...