Dulux Solvent-based Cement Primer

Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 9.2-11.1 sqm/L
  • Drying Time 2.5 hours
  • Coats 1
Product Features
  • Superior Adhesion
  • Better Top Coat Coverage
  • Better Quality Finish
  • Better Top Coat Durability

Product Description

Dulux Solvent Based Cement Primer is suitably designed for use on wall applications. Suitable to be used on plastered, masonry, POP, Limed or pre-painted surfaces. Correct Application of the primer ensures best results of topcoat finish and durability of finish coat.

Application Description

Step 1: Surface Preparation

Ensure that the surface is clean, dry, free from all loose particles, dust, dirt, grease, wax, mould, fungal growth, etc. before application.

Step 2: Application process

Apply a coat of primer. If required, use Dulux Ready Mix Wall Filler or any other oil-based putty to fill cracks and dents and make the surface uniform and free from undulation. After sanding the puttied surface, apply another coat of primer. Allow the primer coat to dry overnight before application of finish paint.

Step 3: Drying time
Dulux Solvent-based Cement Primer is normally touch dry in 30 minutes and recoatable after 2.5 hours.

Health & Safety

Store container in an upright position, with lid tightly closed in a cool dry place. Keep out of reach of children and away from food and animal feed. Refer Safety Data Sheet for more details.

Tips & Advice

  • 1. Preparing the Surfaces
    Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required.
  • 2. Cleaning
    Clean all equipment with Dulux Thinner or white spirit / mineral turpentine immediately after use.
Fetching the data, please wait...