Dulux SuperCover Ultra

Soft Yellow
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 120-140 sqft/litre/2 coats
  • Drying Time 4-6 hours
  • Coats 2
Product Features
  • Silicone technology
  • Colourguard Technology - Long Lasting Colours
  • Anti-Bacterial
  • Fungal Guard
  • Smooth Matt Finish
  • High coverage
  • High opacity

Product Description

Dulux SuperCover Ultra is a smooth premium interior emulsion for walls and ceilling that enables you to bring home the long-lasting colors. Its Silicon technology and Color guard technology ensure that these colors are protected from daily wear and tear and last longer while providing high whiteness and hiding.

Application Description

Before application, read the safety, health and environmental information and the precautions given below.
Application Tool:
Suitable for application by brush and roller.

Health & Safety

Keep out of the reach of children, away from food, drinks and animal feed. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapour/spray. Use only in well ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paints as possible from brushes and rollers before cleaning.

Tips & Advice

  • 1. Preparing the Surfaces
    • Ensure that the surface is clean, dry, free from all loose particles, paint film, dust, dirt, mould, fungal growth etc. before application.
    • Surface should be thoroughly rubbed down using a suitable abrasive paper and thereafter wiped off.
    • For New concrete / plaster, surface should allow to mature properly.
    • For area severely affected by Fungus application of Dulux Aquatech Pre-treatment coat is recommended.
    • Fill up all minor cracks and defects with Dulux Aquatech range of Crack fillers as per requirement / cement and sand mixture in the ration 1:3.
    • In case of areas having dampness use Dulux Aquatech Interior Waterproof Basecoat on the bare surface as per recommendation.
    • Proper surface preparation is must to get the desired effect and finish.
    • Dulux SuperCover Ultra should not be applied to the surfaces or substrates which are exposed to continuous seepage or dampness.
  • 2. Storing
    Observe the label precautions. Store in a cool, dry, well ventilated place away from sources of heat, ignition and direct sunlight. No smoking. Prevent unauthorised access. Containers which are opened should be properly resealed and kept upright to prevent leakage. Do not use or store any paint container by hanging on a hook.
Fetching the data, please wait...