Dulux Aquatech Exterior Pre Treatment Coat

Size
Paint Calculator
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Clear
  • Coverage 111 sqm/L
  • Drying Time 6 hours
  • Coats 1
Product Features
  • Surface Prep Wash
  • FungiClean Technology
  • Anti algal & anti fungal

Product Description

Aquatech Pre Treatment coat helps to kill the fungal and algal infection on the walls. Its unique FungiClean Technology helps to destroy the fungal and algal infection from the roots to ensure that it does not comes back again.

Application Description

Step 1 :Surface Preparation
Remove any fungal, lichen or moss growth by scraping with wire brush. Allow surface to dry completely. For best performance, all existing coatings, where old fungal/algae growth may have been trapped should be scrapped.
Step 2 : Application process
Add 1 liter of Dulux Aquatech Pre-Treatment Coat in 10 liter water and apply it on the desired surface to kill the fungus, algae spores. Allow it to dry for 4-6 hours.
Step 3 : Drying time
Allow 4-6 hours of drying time before following the regular painting procedure for the wall.

Health & Safety

Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding should be used whenever possible. Work in well ventilated areas. Keep out of reach of children. Refer Safety Data Sheet for more details.
  • aquatech_ptc_sds.pdf
  • dulux_aquatech_exterior_pre_treatment_coat_pds.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Clean the surface thoroughly for any powdery loose particles by brushing and water jetting. Allow surface to dry completely.
  • 2. Cleaning
    Clean painting equipment immediately after use and dry