Finish Mid Sheen
- Crack Protection
Tips & Advice
Preparing the Surfaces
Ensure surface is thoroughly clean, dry and free from all loose dirt, chalk, grease, oily substances, fungi, algae and flaking paint. This can be achieved by brushing with a wire/stiff coir brush, followed by water jetting if required. Wet sanding should be used wherever possible. For areas severely affected by algae or fungus application of Dulux Aquatech Pre Treatment Coat is recommended. Fill up all minor cracks and defects with Dulux Aquatech Crack fillers (5mm, 10mm & 20mm) according to the crack size and depth. Avoid application of putty or filling compounds.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 1 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again